RCF XPS 16KD

FEATURES 4 x 4000 W continuous output power 20 ÷ 23000 Hz frequency range Full on-board processing RCF speakers' presets library Proprietary advanced algorithms Networked management via RDNet Native ethernet interface 8 channels Dante board 4.3″ TFT capacitive touch panel XPS 16KD offers a full package of high power amplification, innovative processing, analog and digital audio management in a single solution. It is a high power amplifier dedicated to RCF speaker systems with an onboard dedicated preset library. XPS 16KD offers four independent, processed channels of audio amplification and is capable of driving all professional RCF speaker systems. The main user interface is RDNet, RCF's proprietary control and monitoring software. It is possible to discover, monitor and control a virtually unlimited number of amplifiers. Users will find ready to use definable parametric equalizations, multiband compressors, RCF bass shaper, air absorption compensation, delays and levels. The time delay it is up to four seconds per channel. Most of settings and monitored parameters (channel information, presets, levels, status, grouping and naming as well as user presets) are also accessible through the front panel user interface, made of a capacitive 4.3'' touch screen and an ergonomic rotary encoder. XPS 16KD is equipped with a Dante board that makes 8 additional digital inputs available. Outstanding. Power. Processing. 4 4000 x W Class D Continuous Power at 2.7 Ohms 40-bit Floating-point Processing at 96 kHz Ready-to-Use Configurations and Presets Provided for RCF Speakers 2U Rack Unit Ideal for both touring and installed sound systems Flexible 32-bit Routing with Analog, Digital and Dante I/O Advanced Fault Protections for each Amplifier Channel and Power Supply Power to Change Everything Four-Channel Modular Amplifier XPS 16KD provides extreme power density with 4 x 4000 W continuous power outputs in 2 RU space for both touring and installed sound systems. The unit features 4 analog and digital AES/EBU inputs/outputs, two Dante Network ports, and complete signal processing, tuning, and routing capability all at 96 kHz. Redundancy and full scalability are granted by the advanced and modular design of the circuitry. A complete set of RCF speaker presets is available, with powerful signal processing for complete system tuning. 4 4000 x W CONTINUOUS POWER OUTPUTS New Attitude in Sound Management XPS 16K supports the RCF philosophy with a power-agnostic approach, where the sound system engineer has complete freedom in choosing powered, or externally amplified, modules for their system. XPS 16K offers a new solution for balancing portability, weight, ease of installation, cabling, fast setup speed, and complete remote management of each connected device, via RDNet. Power You Can Trust RCF's effort in assisting both installers and sound providers with the best audio technology and clear, powerful sound is at the core of the company's beliefs. Since 1949, providing both power amplifiers and transducers to the professional market, the RCF experience marks a new milestone with the XPS 16K. Flexible Signal Routing The comprehensive digital architecture of the amplifier features multiple inputs and outputs that can be routed easily to suit any project. Analog inputs 3 and 4 can be switched to 4 AES/EBU digital input ports. Each input can be routed to any of the four digital and power outputs. Dante networking delivers completely lossless audio and near infinite signal routing flexibility on a standard IP network. 1. Universal Mains PowerCon Plug 100V – 240V / 50 to 60 Hz in GPIOs 2.2 Programmable GPIO 3.Fault GPO LAN PORTS 4. LAN1 / LAN2 RJ45 Network Connections INPUTS 5.4 Analog XLR Inputs (A1/A4) 6.4 Digital AES/EBU Inputs (A3/A4) DANTE 7. LAN3 / LAN4 Audio Network Control DANTE Primary and Secondary ports Up to 32 x 32 channels @ 96 kHz AES/EBU LINK 8.4 Digital AES/EBU Outputs (O1/O4) OUTPUTS 9.2 2 SpeakOn Power Outputs Dante® Onboard XPS 16KD LAN 3 and LAN 4 ports are equipped with Ethercon Dante-enabled connectors. Each amplifier becomes a node in Dante digital audio distribution networks. XPS Series High-Density Power Amp Solutions designed for high-performance speakers with advanced processing and flexible routing. READ MORE SPECIFICATIONS Amplifier specifications Amplifier Class: D Output power (EIAJ 8:32 all channels driven): 4 x 4000 W @ 2.7 ohms 4 x 2600 W @ 4 ohms 4 x 1400 W @ 8 ohms Frequency Response (-3dB): 20 Hz ÷ 23000 Hz SNR (unweighted) Analog inputs: 111 dB Digital inputs: 115 dB Crosstalk: THD N (20 Hz ÷ 20000 Hz, 1000 W @ 4ohm): <0.2% Gain (linear mode @ 0 dB): 32 dB Damping factor (@ 4 ohm, 20 Hz ÷ 1500 Hz): > 95 Max burst length (@ 50 Hz, CF = 7 dB, 4 ohm, 1% THD N): 200 ms Input section Total number of inputs: 8 Line inputs: 4 Line connectors: XLR Input impedance: 19 kohm (unbalanced) Maximum input level: 24 dBU Digital inputs: 4 Digital connectors: Ethercon | XLR Digital type: 4 AES/EBU | 8 DANTE General Purpose Inputs (GPI): 2 Programmable GPI: Yes Photo-coupled GPI: Yes Outputs section Signal output number: 4 Signal output connectors: XLR Power output lines: 4 Power output connectors: speakon General Purpose Outputs (GPOs): 3 Programmable GPO: Yes Processing Digital Signal Processing (DSP): 2 SHARC, 40-bit floating point, 96 kHz 2 ADAU 1442, 32-bit fixed point, 96 kHz EQ Filters: Peaking | HI/LO shelving | HI/LO pass (Butterworth, Linkwitz-Riley, Bessel) Advanced algorithms: FiRPHASE technology | BASS shaper | air compensation | mid-low correction | driver excursion control | dynamic PEQ | multi-band compressor | pilot tone detection | backup recovery strategy | impedance load measurement Compressors: RMS limiter | dynamic compressor | power limiter | thermal compressor Delay: Delay: 0 ÷ 4000 ms (each channel) Configuration and control Configuration: Front panel touch screen | PC Software Speaker presets: RCF presets library Control and monitoring protocols: Proprietary OSC based protocol | RDNet Network: Gigabit Ethernet Protections protections: Forced cooling short circuit | thermal | DC | Fuses | VHF (Very High Frequencies) Thermal temperature range Continuous operation: –5°C ÷ 40°C / 23°F ÷ 104°F Reduced output power: -5°C to 50°C / 23°F to 122°F Fan noise idle: <35 dBA Fan noise max: <64 dBA Power supply Operating voltage: 90-240V~ 50/60Hz Nominal current requirements (@ 100-120 V): 30 A Nominal current requirements (@ 200-240 V): 16 A Power consumption standby: 20 W Power consumption idle: 90 W Power consumption max: 5800 W Main fuse: Internal Standard compliance Marking: CE | EXERCISE physical specifications Cabinet/Case Material: Metal Handles: 2 metal handles for rack mount Color: Black Rack mounting: 19″, 2U Size Height: 88.7 mm / 3.49 inches Width: 482 mm / 18.98 inches Depth: 482.4 mm / 18.99 inches Weight: 15 kg / 33.07 lbs Shipping information Package Height: 150 mm / 5.91 inches 580 mm / 22.83 inches Package Width: 580 mm / 22.83 inches Package Depth: 600 mm / 23.62 inches Package Weight: 18 kg / 39.68 lbs