The GTX 10 Installation Series is a two-way line array system suitable for medium to large-scale, high-demanding, installation sound applications, both indoors and outdoors. Equipped with three best-in-class transducers, it offers excellent reproduction quality and optimized directivity in three coverage options enabling precise customization for any project. The integrated rigging hardware allows the system engineer to create arrays with 0° to 10° angles between modules, with 1° steps. Up to 16 modules can be suspended on a single fly-bar. Designed to operate with XPS 16K four-channel DSP amplifiers, each of which is able to manage up to 6 modules. ADVANCED CORE TECHNOLOGY Innovative design refinements enable our new True Resistive Waveguide to provide effective driver loading and precise pattern control for transducers. Designed with Finite Element Analysis and proven in RCF's anechoic chambers, the 4PATH technology produces an ideal isophasic load with low distortion and coherent phase response, even at the lowest crossover frequencies. THE POWER OF SYMMETRY The symmetrical enclosure design and component topology produce consistent coverage from left to right. Symmetrical component positioning and special DSP crossover filtering provide constant directivity and perfect continuity of the hemicylindrical wave directivity without lobes and discontinuities. Frequency modulations are avoided by the optimized active crossover design. HIGH FREQUENCY The 4-inch titanium dome compression drivers, equipped with high-current neodymium magnets, are designed to fully leverage the remarkable capabilities of the TRW-4PATH waveguide. As a result, the GTX10Pi's 70° x 15° coverage is finely matched with the output of its woofers for perfect phase coherence. LOW FREQUENCY The low distortion, high output design of the two 10" HyperVented woofers ensures superb fidelity and high dynamic range. With 3.0" inside-outside voice coils and high flux density neodymium magnets, the fast, high-stiffness motor section provides high impact low-frequency reproduction. ENCLOSURE AND RIGGING HARDWARE The sturdy, weather-resistant birch multi-ply enclosure features optimized hardware for safety and adaptability, including a rear mechanism for angle selection. High-strength Strenx steel rigging hardware ensures secure deployment of up to 16 modules in tension or compression mode. Power connection is provided via a waterproof screw terminal connection panel designed for cables up to AWG 9. The powder-coated protective grille includes a protective foam layer. For enhanced weather resistance, the IP version offers an additional acoustically transparent, water-repellent fabric. Acoustic specifications Frequency Response (-10dB) 42 Hz ÷ 20000 Hz Max SPL @ 1m 143 dB Horizontal coverage angle 70° Vertical coverage angle 15° Power section Amplification bi amp Nominal Impedance LF 8 ohm Nominal Impedance HF 8 ohm Recommended Amplifiers XPS 16K, XPS 16KD Transducers Compression Driver 1 x 1.4" neo, 4.0" vc Woofer 2 x 10" neo, 3.0" vc Input / Output section Input connectors Screw Terminals Output connectors Screw Terminals Standard compliance IP protection class IP 55 Safety agency CE compliant physical specifications Cabinet/Case Material Birch plywood Hardware Array fittings Grid Steel with clothing Color Black Size / Weight Height 337 mm / 13.27 inches Width 750 mm / 29.53 inches Depth 482.3 mm / 18.99 inches Weight 32 kg / 70.55 lbs Shipping information Package Height 539 mm / 21.22 inches Package Width 787 mm / 30.98 inches Package Depth 382 mm / 15.04 inches Package Weight 37 kg / 81.57 lbs
